Industrial & OEM Battery Packs
Replacement and build-to-spec packs for industrial equipment and OEM products — the low-volume, well-documented battery work larger suppliers decline.
Quote a PackAll Battery CapabilitiesPower for Equipment Builders
Industrial OEMs and equipment builders hit two battery problems: a pack that went obsolete before the machine did, and volumes too small for big suppliers to quote. BAM builds both sides — drop-in replacements matched to an installed machine’s original fit, connector, and electrical behavior, and build-to-spec packs for OEM products, in the 1-to-few-hundred volumes that fall between a distributor’s MOQ and a contract manufacturer’s floor. Documentation the maintenance file or the product file can keep.
Build Details
| Chemistries | Li-ion, LiFePO4, NiMH/NiCd — to the equipment or the original |
| Use cases | Drop-in replacements for installed equipment; build-to-spec OEM product packs |
| Built to | Original fit/connector/behavior, or your product spec and drawing |
| Integration | BMS, protection, connectors, and form factor to the application |
| Volume | One service unit through a few hundred per run — the band big suppliers decline |
| Documentation | Lot and date-code traceability, Certificate of Conformance, SDS, and UN 38.3 support (lithium chemistries) — provided to the requirement of the build. |
| Shipping | 49 CFR hazmat trained — lithium chemistries prepared and labeled for ground shipping in-house; nickel chemistries ship without lithium restrictions. |
| Quantities | One unit through pilot and production runs. No artificial minimums; every project reviewed for fit. |
By Application
Industrial / OEM Questions
Our pack supplier discontinued our machine’s battery — can you replicate it?
Usually — send the original. Reverse-documenting produces a drawing you keep, and replacements build against it from then on.
What volume do you build at?
One service unit through a few hundred per run — the volume band larger suppliers decline is the work this shop is built for.
Can you build OEM packs for our product?
Yes — build-to-spec packs to your drawing, first-articled and documented, with consistent repeat builds as you scale.
Do you sign NDAs?
Yes — routine for OEM work.
How Your Quote Runs
Spec review
Original pack or product spec reviewed; reverse-documentation quoted if needed.
Cell selection & first article
Cells matched to fit and behavior; first article verified against the original.
Build & test
Assembly per the documented build; capacity and IR verified on calibrated equipment.
Documentation & ship
Records to the requirement; shipping prepared to the applicable regulations for the pack's chemistry.
Send the spec or the discontinued pack.
Most quotes are answered within a few business days.
Request a QuoteIndustrial & OEM Battery Packs
Replacement and build-to-spec packs for industrial equipment and OEM products — the low-volume, well-documented battery work larger suppliers decline.
Quote a PackAll Battery CapabilitiesPower for Equipment Builders
Industrial OEMs and equipment builders hit two battery problems: a pack that went obsolete before the machine did, and volumes too small for big suppliers to quote. BAM builds both sides — drop-in replacements matched to an installed machine’s original fit, connector, and electrical behavior, and build-to-spec packs for OEM products, in the 1-to-few-hundred volumes that fall between a distributor’s MOQ and a contract manufacturer’s floor. Documentation the maintenance file or the product file can keep.
Build Details
| Chemistries | Li-ion, LiFePO4, NiMH/NiCd — to the equipment or the original |
| Use cases | Drop-in replacements for installed equipment; build-to-spec OEM product packs |
| Built to | Original fit/connector/behavior, or your product spec and drawing |
| Integration | BMS, protection, connectors, and form factor to the application |
| Volume | One service unit through a few hundred per run — the band big suppliers decline |
| Documentation | Lot and date-code traceability, Certificate of Conformance, SDS, and UN 38.3 support (lithium chemistries) — provided to the requirement of the build. |
| Shipping | 49 CFR hazmat trained — lithium chemistries prepared and labeled for ground shipping in-house; nickel chemistries ship without lithium restrictions. |
| Quantities | One unit through pilot and production runs. No artificial minimums; every project reviewed for fit. |
By Application
Industrial / OEM Questions
Our pack supplier discontinued our machine’s battery — can you replicate it?
Usually — send the original. Reverse-documenting produces a drawing you keep, and replacements build against it from then on.
What volume do you build at?
One service unit through a few hundred per run — the volume band larger suppliers decline is the work this shop is built for.
Can you build OEM packs for our product?
Yes — build-to-spec packs to your drawing, first-articled and documented, with consistent repeat builds as you scale.
Do you sign NDAs?
Yes — routine for OEM work.
How Your Quote Runs
Spec review
Original pack or product spec reviewed; reverse-documentation quoted if needed.
Cell selection & first article
Cells matched to fit and behavior; first article verified against the original.
Build & test
Assembly per the documented build; capacity and IR verified on calibrated equipment.
Documentation & ship
Records to the requirement; shipping prepared to the applicable regulations for the pack's chemistry.
Send the spec or the discontinued pack.
Most quotes are answered within a few business days.
Request a Quote