Test Fixtures & Jigs
Fixtures, jigs, and build-support tooling that make assembly, inspection, and testing repeatable — designed from your part files and built in the same shop that uses tooling like this every day.
Quote a FixtureSend Part FilesPart & process review
Your part files and the operation the fixture must support — assembly, inspection, or test — define the design.
Design & approve
Fixture design returned for sign-off before material is cut.
Build & prove
Fixture machined, assembled, and proven against real parts.
Document
Use instructions and maintenance notes delivered with the tooling.
What We Build
Assembly fixtures
Holding, locating, and alignment tooling that makes the tenth build match the first.
Test fixtures
Powered and instrumented fixtures — spring-pin contact, connector breakouts, and instrument integration for functional test.
Inspection gauges
Go/no-go and locating gauges for receiving and in-process checks.
Process jigs
Soldering, bonding, potting, and cure-positioning jigs for repeatable process steps.
Instrumented bench tooling
Fixtures integrated with electronic loads and measurement equipment — including custom battery test devices.
Packaging & handling aids
Trays, nests, and protective tooling for moving delicate assemblies through a build.
Build Details
| Design inputs | STEP/CAD part files, drawings, or the physical part itself — reverse-modeling is available. |
| Materials | Machined aluminum, engineering polymers, and 3D-printed components, matched to wear and accuracy needs. |
| Electronics integration | Powered fixtures with instrumentation, wiring, and interfaces built in-house. |
| Quantities | Typically one-offs and small sets; duplicates quoted with the original. |
| Documentation | Fixture drawings, use instructions, and calibration notes where measurements matter. |
Tooling Questions
Can you design from our part files, or do you need the part?
Either. CAD files are fastest; a physical part can be reverse-modeled as part of the job.
Do you build instrumented or powered fixtures?
Yes — fixtures with integrated power, measurement, and electronic loads are a specialty, including custom battery test equipment.
What happens when our part revs?
Fixtures are documented so revisions are quotable updates, not rebuilds — send the new rev and the delta gets assessed.
Do you build tooling for processes you don't run?
Yes — the fixture ships with use instructions; proving it on your parts before delivery is part of the build.
Send the part. Get tooling that makes it repeatable.
Most quotes are answered within a few business days.
Request a QuoteTest Fixtures & Jigs
Fixtures, jigs, and build-support tooling that make assembly, inspection, and testing repeatable — designed from your part files and built in the same shop that uses tooling like this every day.
Quote a FixtureSend Part FilesPart & process review
Your part files and the operation the fixture must support — assembly, inspection, or test — define the design.
Design & approve
Fixture design returned for sign-off before material is cut.
Build & prove
Fixture machined, assembled, and proven against real parts.
Document
Use instructions and maintenance notes delivered with the tooling.
What We Build
Assembly fixtures
Holding, locating, and alignment tooling that makes the tenth build match the first.
Test fixtures
Powered and instrumented fixtures — spring-pin contact, connector breakouts, and instrument integration for functional test.
Inspection gauges
Go/no-go and locating gauges for receiving and in-process checks.
Process jigs
Soldering, bonding, potting, and cure-positioning jigs for repeatable process steps.
Instrumented bench tooling
Fixtures integrated with electronic loads and measurement equipment — including custom battery test devices.
Packaging & handling aids
Trays, nests, and protective tooling for moving delicate assemblies through a build.
Build Details
| Design inputs | STEP/CAD part files, drawings, or the physical part itself — reverse-modeling is available. |
| Materials | Machined aluminum, engineering polymers, and 3D-printed components, matched to wear and accuracy needs. |
| Electronics integration | Powered fixtures with instrumentation, wiring, and interfaces built in-house. |
| Quantities | Typically one-offs and small sets; duplicates quoted with the original. |
| Documentation | Fixture drawings, use instructions, and calibration notes where measurements matter. |
Tooling Questions
Can you design from our part files, or do you need the part?
Either. CAD files are fastest; a physical part can be reverse-modeled as part of the job.
Do you build instrumented or powered fixtures?
Yes — fixtures with integrated power, measurement, and electronic loads are a specialty, including custom battery test equipment.
What happens when our part revs?
Fixtures are documented so revisions are quotable updates, not rebuilds — send the new rev and the delta gets assessed.
Do you build tooling for processes you don't run?
Yes — the fixture ships with use instructions; proving it on your parts before delivery is part of the build.
Send the part. Get tooling that makes it repeatable.
Most quotes are answered within a few business days.
Request a Quote